Extra-Wide Stainless Steel Plate Supplier Up to 3000 mm Width

Sachiya Steel International supplies extra-wide stainless steel plate from Mumbai in widths up to 3000 mm. Plate cut from coil stops at about 1500 to 2000 mm. Wider sizes are quarto plate, rolled one slab at a time, and that is how we supply everything above 2500 mm.

Wide plate is used for storage tank and pressure vessel shells, silos, chimney and duct work, ship and barge sections, and heavy structural fabrication. A wider plate means fewer joints in the shell, so there is less welding, less testing and less distortion to correct.

Common sizes are 2500 × 6000 mm, 2500 × 12000 mm, 3000 × 6000 mm and 3000 × 12000 mm. Width above 2500 mm depends on the grade and the thickness ordered, so those sizes are quoted per order.

Stainless Steel Plate Specifications

ASTM A240/ASME SA-240 stainless steel plates cover chromium and chromium-nickel flat-rolled products for pressure vessels and general use. Table shows key specifications.

Property Details
Standard ASTM A240 / ASME SA-240
Grades 304, 304L, 316, 316L, 321, 347, 904L, Duplex 2205, Super Duplex 2507
Thickness 3 mm to 150 mm (1/8" to 6")
Width 1000 mm to 3000 mm; over 2500 mm is quarto-rolled, grade and thickness dependent
Length 2000 mm to 12000 mm; 6000 mm (20 ft) and 12000 mm (40 ft) are the standard stock lengths
Surface Finish No.1, 2B, 2D, BA, No.4, No.8
Forms Hot-rolled, cold-rolled, quarto, cut-to-size

Stainless Steel Plate Dimensional Standards

Refer to the following technical data for the material specifications and mechanical requirements of Stainless Steel Plates.

Standard Plate Sizes and Thickness Chart

Thickness Range (mm) Standard Widths (mm) Standard Lengths (mm)
3.0 mm – 6.0 mm 1000, 1219, 1250, 1500 2000, 2438, 2500, 3000, 6000
Over 6.0 mm – 25.0 mm 1500, 2000, 2500, 3000 6000, 9000, 12000
Over 25.0 mm – 80.0 mm 1500, 2000, 2500, 3000 6000, 8000
Over 80.0 mm – 150.0 mm 1500, 2000 4000, 6000

Stainless Steel Plate Surface Finishes

We supply stainless steel plates in various surface finishes to satisfy aesthetic, hygienic, and corrosion-resistance needs. You must choose carefully. Your selection directly impacts how that plate will perform throughout its final, real-world industrial application.

  • No. 1 Finish (Hot-Rolled, Annealed, and Pickled)
  • 2B Finish (Cold-Rolled, Skin-Passed)
  • 2D Finish (Cold-Rolled, Matt Finish)
  • BA Finish (Bright Annealed)
  • No. 4 Finish (Satin, Brushed, or Directional)
  • No. 8 Finish (Mirror Polished)
  • Hairline Finish
  • Bead Blasted Finish

Stainless Steel Plate Price

SS steel plate prices vary with the grade and the thickness ordered. In India the standard 304L runs between ₹205 and ₹255 per kilogram, which is about $2.41 to $3.00 at ₹85 to the dollar. Grades such as 316L and Duplex 2205 cost significantly more. To obtain project-specific prices and comprehensive documentation, please get in touch with Sachiya Steel International.

Types of Stainless Steel Plates

We stock stainless plates in four forms. Which one a job needs is decided by thickness and width. Cold-rolled covers the thin end up to 6 mm, and hot-rolled takes over above it. Quarto plate carries the widest and heaviest sizes. Cut-to-size is any of the three, cut to a drawing before it ships.

Hot-rolled (HR) plates

Hot-rolled (HR) plates

Cold-rolled (CR) plates

Cold-rolled (CR) plates

Quarto (extra-wide) plates

Quarto (extra-wide) plates

Cut-to-size plates

Cut-to-size plates

Request a Quote for SS Plates Request a Quote

Stainless Steel Plate Grades We Stock

Nine grades are held in plate thickness at the Mumbai yard, which is the working range most buyers want from a stainless steel plates manufacturer. Which grade belongs on a drawing is usually settled by one property rather than by price, so each row below names that property first. Each grade in the table opens the full page for those stainless steel metal plates.

Grade UNS Why it gets specified
SS 304 Plate S30400 General-purpose 18/8 plate; 515 MPa minimum tensile
SS 304L Plate S30403 Carbon held to 0.030% max so welded seams resist sensitisation
SS 316 Plate S31600 Molybdenum bearing, for chloride and mild acid service
SS 316L Plate S31603 The low-carbon 316 used for welded chemical plant; 485 MPa minimum tensile
SS 321 Plate S32100 Titanium stabilised, for sustained heat where 304 would sensitise
SS 347 Plate S34700 Niobium stabilised, the alternative to 321 on weld-heavy work
SS 904L Plate N08904 High nickel with copper for sulphuric acid; 490 MPa minimum tensile
Duplex 2205 Plate S32205 Around 655 MPa tensile, near double the yield of 304
Super Duplex 2507 Plate S32750 Reaches 800 MPa tensile with a PREN above 40

Stainless Metal Plate Weight and Density

Plate is bought by weight and shipped by weight, so the kilogram figure settles the invoice and the lorry booking alike. Austenitic grades run at 8.00 g/cm³, which means a stainless metal plate weighs 8 kg per square metre for every millimetre of thickness, and the chart below is that one multiplication carried across the stock range.

Thickness (mm) Weight per m² (kg) 1500 × 6000 mm plate (kg)
3 24.0 216
6 48.0 432
10 80.0 720
12 96.0 864
16 128.0 1152
20 160.0 1440
25 200.0 1800
30 240.0 2160
40 320.0 2880
50 400.0 3600
80 640.0 5760
100 800.0 7200
150 1200.0 10800

Weight (kg) = thickness in mm × width in m × length in m × 8. A 10 mm plate at 1500 × 6000 mm therefore works out at 10 × 1.5 × 6 × 8 = 720 kg. Duplex and super duplex sit slightly lighter, near 7.8 g/cm³, so treat the chart as austenitic.

SS Plate Industrial Applications

Six key industries use stainless steel plates for demanding projects. To ensure reliability globally, engineers must choose grades flawlessly, as temperature and corrosion hazards often threaten the integrity of these critical systems.

Oil & Gas Industry

SS plates in grades 316L are used for pressure vessels, separators, and heat exchangers in upstream and downstream oil and gas operations.

Chemical & Petrochemical Processing

Grade 904L plates are capable of resisting mixed, phosphoric, and sulphuric acids. This material performs optimally in chemical settings characterised by high chloride levels and other severe corrosive conditions.

Food, Beverage & Pharmaceutical

Grades 304 and 316L are perfect for food and pharma. These plates provide the non-reactive, sanitary surfaces needed for processing tanks, vessel linings, and clean room walls. They keep everything sterile and safe.

Power Generation

Grades 321 plates are specified for boiler baffles, superheater supports, and furnace linings where continuous service temperatures exceed 600 degrees Celsius.

Construction & Architecture

Grade 304 plates are utilised for cladding panels, structural supports, lift interiors and decorative facades in both business and residential edifices.

Marine & Offshore

SS plates resist seawater corrosion in offshore platform decking, desalination plants, and shipboard piping systems.

Shipping & Packaging

Main export packaging setup Heavy-Duty Wooden Box Packing
Export Packaging Standard

Stainless plate keeps its finish only if nothing is dragged across it. Plates are separated, stacked on timber and lifted clear of each other when loaded.

  • Heavy-duty wooden boxes or strapped bundles, with moisture barrier lining
  • LLDPE stretch film wrapping on all bundles
  • Edge and corner protection with plastic padding
  • Silica gel desiccants to minimise moisture exposure
  • ISPM-15 compliant wooden packaging for export
Bundle Yard Staging Plate Bundle Yard Staging
Bundle Edge Protection Plate Bundle Edge Protection
Export-Ready Bundles Wrapped Export-Ready Bundles

We Export Worldwide

Sachiya Steel International supplies stainless steel products to major industrial markets across North America, Europe, the Middle East, Asia and Africa with export-ready documentation and logistics support.

  • USA flagUSA
  • Canada flagCanada

Frequently Asked Questions

Grade, thickness, and order quantity affect stainless steel plate cost per kilogram. Most affordable austenitic plates are 304/304L. Prices run from ₹205 to ₹255 per kilogram, about $2.41 to $3.00 at ₹85 to the dollar. Duplex and super austenitic grades cost more. For an actual quote, please contact us with your specifications.
The primary specification is ASTM A240 / ASME SA-240, which covers chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and general applications.
Grade selection depends on the type of corrosion. 316L suits chloride-bearing environments due to its 2-3% molybdenum content. For sulphuric acid service, 904L or Alloy 20 is preferred. Duplex 2205 handles offshore and high-chloride conditions, and super duplex 2507 is specified for the most aggressive subsea environments.
Stainless steel plates are available in thicknesses from 3 mm (1/8 inch) through 150 mm (6 inches).
The difference is thickness. ASTM A480 draws the line at 4.76 mm (3/16 in), and at or above that a flat-rolled product is plate. Indian stockists list plate from 3 mm upward, which is why the sizes on this page start at 3 mm while the same material is called heavy sheet in some export markets. ASTM A240 covers both. Plate over about 6 mm is hot-rolled; thinner material is normally cold-rolled.
Yes, we offer cut-to-size stainless steel plates through plasma, waterjet, and laser cutting. Standard mill sizes include widths up to 3000 mm and lengths up to 12000 mm. Custom dimensions are available on request.
Stainless steel plates are available in No.1 (hot-rolled, annealed, pickled), 2B (cold-rolled, skin-passed), 2D, BA (bright annealed), No.4 (satin/brushed), and No.8 (mirror polished) finishes. Finish selection depends on the application.
We supply mill test certificates per EN 10204 3.1 with every order. Soft copies of all manufacturing, quality, and material test certificates are provided as standard. Our ISO-certified quality management system covers the full supply chain from sourcing to dispatch.
We supply plate to 3000 mm wide. Past about 2500 mm the material has to be quarto-rolled rather than cut from coil, so the widest sizes are quoted against the grade and thickness together. Below 6 mm the coil route applies and the practical limit is 1500 mm.

Contact Us for Availability and Current Pricing Request a Quote